Knee Sports Medicine

New product innovation in arthroscopic surgery is the heart and soul of Biotek, which has resulted in the development of wide range of products for arthroscopic and minimally invasive orthopaedic surgical procedures. BIOTEK offers comprehensive range of products of sports medicine.

Onbutton EX ONButton EX Fixation Button View Details

ONButton EX Fixation Button

Onbutton Ex
Onbutton Ex

Fixation device is designed to provide extended surface area. It can be used in conjunction with Onbutton CL which provides an effective solution for cortical blowouts. It also helps overcome intraoperative complications seen in revision cases.

Ordering Information

10093 Onbutton-EX Fixation Button
Onbutton CL ONButton CL® View Details

ONButton CL®

Onbutton

New CL construct
Continuous loop of suture braid eliminates the need for knot tying and allows for a larger portion of graft to reside in the tunnel.

Efficient
Preloaded with braided sutures (#7 Biofiber®, white-blue as Pulling/leading suture and #5 polyester, green as Flipping suture)for added procedure efficiency.

Greater strength
Tested for UTS-Ultimate Tensile Strength. Meets or exceeds 2200 N. Highest failure load compared to competitive technologies

Accommodates various graft lengths
One size titanium button is available with multiple pre-measured loop sizes of 12, 15, 20, 25, 30, 35, 40mm lengths.

Truly endoscopic procedure
Does not require a second incision.

Solid fixation for either primary or auxiliary fixation in ACL or PCL reconstruction.

Clinically Proven
Supported by over 100000 cases of clinical success all over India and abroad.

Promotes insertion site healing
Rests on the cortical bone surface

Strong cortical fixation
Provides dependable fixation regardless of cancellous bone quality

Provides tactile "flipping" feedback
Ensures proper seating of device

Hassle-free revision surgeries
Standard technique allows for arthroscopic revision without lateral incision and bone removal

Most comprehensive line of femoral fixation solutions
Can be used in Single-Bundle soft tissue fixation; Double-Bundle soft tissue fixation; Bone-Tendon-Bone fixation

Ordering Information

BAK-7001C.12 ONButton CL® Fixation Button, loop size 12mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.15 ONButton CL® Fixation Button, loop size 15mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.20 ONButton CL® Fixation Button, loop size 20mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.25 ONButton CL® Fixation Button, loop size 25mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.30 ONButton CL® Fixation Button, loop size 30mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.35 ONButton CL® Fixation Button, loop size 35mm
Pulling Fiber: White-Blue, Flipping Fiber: Green
BAK-7001C.40 ONButton CL® Fixation Button, loop size 40mm
Pulling Fiber: White-Blue, Flipping Fiber: Green

Related Instrumentation

BAK-7052 Endoscopic Reamer, Dia. 4.5mm Cannulated
BAK-7118 Endoscopic Reamer, Dia. 4.7mm for ONButton CL® Cannulated
Buttonfix BUTTONFIX® View Details

BUTTONFIX®

Buttonfix

Very strong fixation and unique design for graft protection

The BUTTONFIX® Fixation Button with Adjustable Loop provides Leading strength and incorporating a unique design to help protect the graft during loop reduction. Single loop size of BUTTONFIX® can be universally used with any graft length. The graft support frame protects the graft from damage and any abrasion. UTS-Ultimate Tensile Strength of BUTTONFIX® is 1300 N.

Features

  • Maximized graft in tunnel
  • Double locking loop mechanism
  • Preloaded with braided sutures (white as pulling suture and green as flipping suture)
  • Requires minimal force to reduce loop
  • Compatible with common extension devices
  • Familiar Loop Reduction Procedure

Ordering Information

BAK-7195 BUTTONFIX® Fixation Button with Adjustable Loop

Related Instrumentation

BAK-7052 Endoscopic Reamer, Dia. 4.5mm Cannulated
BAK-7118 Endoscopic Reamer, Dia. 4.7mm for ONButton CL® Cannulated
BT-FIX BT-FIX View Details

BT-FIX Adjustable Fiber Loop for Attachable Button System

BT-FIX

The BT-FIX Adjustable Fiber Loop for Attachable Button System is an implant that can be used for cortical fixation with SMARTFIX Tibial base plate over the cortical bone. The BT-FIX Adjustable loop can be used for the tibial fixation in all inside ACL-PCL Reconstruction technique.

The slotted holes of SMARTFIX Tibial base plate can be loaded over the buttonless BT-FIX Adjustable Fiber loop. During procedure, the adjustable loop of the system is passed through the narrow tunnel and the SMARTFIX remains on the cortex which maximizes button to bone contact. The system provides the knotless locking mechanism for strong and stiff graft fixation.

Ordering Information

10049 BT-FIX Adjustable Fiber Loop for Attachable Button System
BAK-7221S SMARTFIX, Tibial Base Plate, Size Medium
BAK-7222S SMARTFIX, Tibial Base Plate, Size Large
Biotwin<sup>™</sup> Interference Screw, Biocomposite Biotwin Interference Screw, Biocomposite View Details

Biotwin Interference Screw, Biocomposite

Biotwin� Interference Screw, Biocomposite

Biocompatible Interference Resorbable Screw
Biotwin was designed to fulfill two core aims: provide appropriate mechanical properties necessary for ligament reconstruction whilst ensuring a regulated resorption and osteointegration to form architectural bone through hydrolysis*.

Canulated Resorbable Screw Design
The thread is specific to each screw diameter so as to systematically provide the maximum amount of contact between implant and bone.

Biotwin� Interference Screw, Bio composite

75% PLDLLA & 25% BCP: the convenient ratio between the necessary mechanical resistance for the indication and the faculty to generate bone growth
Manufactured by Biomatlante, France

Ordering Information

BT11CPVI0720 BIOTWIN Composite Interference Screw 7*20mm
BT08CPVI0725 BIOTWIN Composite Interference Screw 7*25mm
BT08CPVI0730 BIOTWIN Composite Interference Screw 7*30mm
BT11CPVI0820 BIOTWIN Composite Interference Screw 8*20mm
BT08CPVI0825 BIOTWIN Composite Interference Screw 8*25mm
BT08CPVI0830 BIOTWIN Composite Interference Screw 8*30mm
BT11CPVI0920 BIOTWIN Composite Interference Screw 9*20mm
BT08CPVI0925 BIOTWIN Composite Interference Screw 9*25mm
BT08CPVI0930 BIOTWIN Composite Interference Screw 9*30mm
BT12CPVI1025 BIOTWIN Composite Interference Screw 10*25mm
BT08CPVI1030 BIOTWIN Composite Interference Screw 10*30mm
BT15CPVI1135 BIOTWIN Composite Interference Screw 11*35mm
BT15CPVI1235 BIOTWIN Composite Interference Screw 12*35mm

Related Instruments

BAK-7197 Screwdriver for Bio-Composite Interference Screws, Cannulated
BAK-7191 Guide Wire for SOFTFIX-PK® Interference Screws Dia. 1.2mm; Len. 300mm (SS)
BAK-7180 Guide Wire for SOFTFIX-PK® Interference Screws Dia. 1.2mm; Len. 300mm (Nitinol)
10120 Screwdriver for BIOTWIN™ Composite Interference Screws, Cannulated
SOFTFIX-PK Interference screws, cannulated SOFTFIX-PK® Interference screw, PEEK View Details

SOFTFIX-PK® Interference screw, PEEK

SOFTFIX-PK Interference screws, cannulated
  • SOFTFIX-PK® Interference Screws provide strong mechanical fixation for both bone patellar tendon-bone (BTB) and soft tissue grafts in ACL and PCL reconstruction.
  • SOFTFIX-PK® Interference Screws feature a thread pattern that allows for a simple surgical technique, with minimal tunnel preparation.
  • Non-absorbable SOFTFIX-PK® interference screw incorporates PEEK-VESTAKEEP® polymer from Evonik®.
  • PEEK-VESTAKEEP® material exhibits an ideal combination of strength, stiffness and toughness which surpasses absorbable materials.
  • PEEK (Poly-Ether-Ether-Ketone) is a thermoplastic material with excellent biocompatibility and bio stability characteristics as per ASTM F2026.
  • SOFTFIX-PK® interference screws offer the revision ability of an absorbable screw.
  • PEEK has inherent radiolucent characteristics that have widely gained confidence and acceptance in the medical community.

Ordering Information

BAK-7165.23 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 6.0mm, Len. 23mm
BAK-7166.23 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 7.0mm, Len. 23mm
BAK-7166.28 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 7.0mm, Len. 28mm
BAK-7167.23 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 8.0mm, Len. 23mm
BAK-7167.28 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 8.0mm, Len. 28mm
BAK-7168.23 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 9.0mm, Len. 23mm
BAK-7168.28 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 9.0mm, Len. 28mm
BAK-7168.35 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 9.0mm, Len. 35mm
BAK-7169.28 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 10.0mm, Len. 28mm
BAK-7169.35 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 10.0mm, Len. 35mm
BAK-7170.35 SOFTFIX-PK® Interference screw, cannulated, roundhead; Dia. 11.0mm, Len. 35mm

Related Instrumentation

Guide Wire for SOFTFIX-PK® interference screws

Single use (SS), includes calibration marks to assist in screw

BAK-7191 Guide Wire for SOFTFIX-PK® Interference Screws Dia. 1.2mm; Len. 300mm (SS)
BAK-7180 Guide Wire for SOFTFIX-PK® Interference Screws Dia. 1.2mm; Len. 300mm (Nitinol)

Cannulated screwdriver for SOFTFIX-PK® interference screws

Cannulated for ease of use with guide wires.

BAK-7161 Screwdriver for SOFTFIX-PK® PEEK Interference Screws Cannulated
SOFTFIX Interference Screws, cannulated, roundheaded, Titanium SOFTFIX® Interference screws, Titanium View Details

SOFTFIX® Interference screws, Titanium

SOFTFIX Interference screws, cannulated, Titanium
  • Specifically designed for endoscopic femoral fixation where graft protection is needed.
  • Polished, fully radiused threads provide maximum graft protection.
  • Wide-bore cannulation for easy guide wire insertion and removal.
  • The Taper-Tip style offers sharper initiating threads and a more pronounced taper for faster, easier insertion.
  • Designed to reduce the possibility of bone plug migration during placement.
  • Round head reduces possibility of graft damage during or after implantation.
  • Universal screw for either tibial or femoral applications.
  • Standard 4.5mm hex for easy insertion and removal.
  • Cannulated for use with a guide wire.
  • Material -Titanium alloy.

Ordering Information

BAK-7128.20S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 7.0mm, Len. 20mm
BAK-7128.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 7.0mm, Len. 25mm
BAK-7128.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 7.0mm, Len. 30mm
BAK-7101.20S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 8.0mm, Len. 20mm
BAK-7101.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 8.0mm, Len. 25mm
BAK-7101.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 8.0mm, Len. 30mm
BAK-7102.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 9.0mm, Len. 25mm
BAK-7102.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 9.0mm, Len. 30mm
BAK-7114.25S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 10.0mm, Len. 25mm
BAK-7114.30S SOFTFIX® Interference screw, cannulated, roundhead, Dia. 10.0mm, Len. 30mm

Related Instrumentation

Guide Wire for SOFTFIX® interference screws

Single use (SS), includes calibration marks to assist in screw placement.

BAK-7120 Guide Wire for SOFTFIX® Interference Screws Dia. 2.0mm; Len. 300mm (SS)
BAK-7183 Guide Wire for SOFTFIX® Interference Screws Dia. 2.0mm; Len. 300mm (Nitinol)

Cannulated screwdriver for SOFTFIX® interference screws

Cannulated for ease of use with guide wires.

BAK-7063 Screwdriver for SOFTFIX® Titanium Interference Screws Cannulated
Onbutton ONButton View Details

ONButton

Onbutton

The titanium button is the original endoscopic femoral soft tissue fixation device.

It can be used for single incision, soft tissue, or bone-tendon-bone fixation.

Ordering Information

BAK-7001 ONButton Fixation Button
Low-Profile Cancellous Screws And Spiked Washers LOW PROFILE cancellous bone screw And SPIKED WASHER View Details

LOW PROFILE cancellous bone screw And SPIKED WASHER

Low- Profile Cancellous Screws And Spiked Washers
  • The low-profile screw and washer combination provides 31% to 50% lower profile than competitive versions.
  • Low profile cancellous screw and spiked washer set provide continuous strength for soft tissue fixation to bone.
  • Low profile head to reduce soft tissue irritation.
  • Can be used as a post screw for suture or soft tissue fixation.
  • Ideal for ACL, PCL, collateral ligament or posteriolateral reconstruction.
  • Unique washer design with spikes on the inferior surface provides excellent fixation of soft tissue to bone.
  • Low profile cancellous screws available in diameter 4.0mm and 6.5mm. Spiked washers also available in small and large size accordingly.
  • Material -Titanium alloy.

Ordering Information

BAK-7129.30S LOW PROFILE cancellous bone screw, cannulated, Dia. 4.0mm, Len. 30mm
BAK-7129.35S LOW PROFILE cancellous bone screw, cannulated, Dia. 4.0mm, Len. 35mm
BAK-7129.40S LOW PROFILE cancellous bone screw, cannulated, Dia. 4.0mm, Len. 40mm
BAK-7006.35S LOW PROFILE cancellous bone screw, cannulated, Dia. 6.5mm, Len. 35mm
BAK-7006.40S LOW PROFILE cancellous bone screw, cannulated, Dia. 6.5mm, Len. 40mm
BAK-7130S SPIKED WASHER for 4.0mm cancellous screw
BAK-7010S SPIKED WASHER for 6.5mm cancellous screw
Tibial Post Fixation Screw TIBIAL POST® fixation screw View Details

TIBIAL POST® fixation screw

Tibial Post Fixation Screw

Used to securely trap attached sutures and bulky suture knots atraumatically under the low-profile head to eliminate soft tissue irritation.

  • Available in diameter 6.5mm and lengths 30,35 and 40mm
  • Material-Titanium alloy.

Ordering Information

BAK-7011.30S TIBIAL POST® fixation screw, Dia. 6.5mm, Len. 30mm
BAK-7011.35S TIBIAL POST® fixation screw, Dia. 6.5mm, Len. 35mm
BAK-7011.40S TIBIAL POST® fixation screw, Dia. 6.5mm, Len. 40mm
STAYFIX Spiked Ligament Staple STAYFIX® Spiked Ligament staple View Details

STAYFIX® Spiked Ligament staple

STAYFIX Spiked Ligament Staple
  • The staple fixation system provides a simple means of attaching tissue to bone.
  • Low-profile, wide staple base provides better load distribution.
  • Spike-post leg design encourages uninterrupted vascular flow to the underlying tissue.
  • Sharp leg points for easier penetration into cortical bone.
  • Two pronged implant for superior pull out strength.
  • Fixation staples are available in two sizes.
  • Material-Titanium alloy.

Ordering Information

BAK-7013S STAYFIX® Spiked Ligament staple, Size Small
BAK-7015S STAYFIX® Spiked Ligament staple, Size Large

Related Instrumentation

Used in ACL reconstruction for impaction of spiked ligament staples.

BAK-7064 Impactor for STAYFIX®Spiked Ligament Staple
10122 Impactor (Side Lock) for STAYFIX®Spiked Ligament Staple
STAYFIX®-T STAYFIX®-T View Details

STAYFIX®-T

STAYFIX®-T

STAYFIX-T staples are made of stainless steel, available in two sizes: small and large. It can be used for bone correction of osteotomy and also stabilization of hinge fracture.

Size Diameter Width Length
Small 2.5mm 25mm 20mm
Large 2.5mm 25mm 25mm

Ordering Information

10097 STAYFIX®-T Staple, Size: Small, 20mm x 25mm
10098 STAYFIX®-T Staple, Size: Large, 25mm x 25mm

Related Instrumentation

10121 Impactor (Side Lock) for STAYFIX®-T Staple
SUTUREFIX Tibial Base Plates SUTUREFIX® Tibial Base Plates View Details

SUTUREFIX® Tibial Base Plates

SUTUREFIX Tibial Base Plates
  • Used for tibial fixation of the ACL and PCL graft.
  • Indirect extra-articular fixation of tibial-end of the graft.
  • Available in round hole.
  • Material -Titanium alloy.

Ordering Information

BAK-7080S SUTUREFIX® Tibial base plate, round hole
SMARTFIX Tibial Base Plates SMARTFIX Tibial Base Plates View Details

SMARTFIX Tibial Base Plates

SMARTFIX Tibial Base Plates
  • It is the upgraded version of tibial base plate.
  • It may be used for tibial fixation of the graft in Cruciate reconstruction technique (All Inside ACL reconstruction technique)
  • The two cutting edges of button helps in holding and twisting to further tense the graft. The serration provided on the bottom side helps to lock the button on the tibial cortex.
  • It is available in two sizes - Medium and Large. Medium size can be used with the tunnel dia. of 7 and 8mm. Large size can be used with the tunnel dia. of 9, 10 and 11mm.

Ordering Information

BAK-7221S SMARTFIX, Tibial Base Plate, Size Medium
BAK-7222S SMARTFIX, Tibial Base Plate, Size Large
ONLoc� Drill Guide System ONLoc® Drill Guide System View Details

ONLoc® Drill Guide System

ONLoc� Drill Guide System

A highly precise drill guide available for cruciate reconstruction-The ONLoc® Drill Guide conforms to each patient's anatomy, offering surgeons flexibility, accuracy and control. The ONLoc® Drill Guide System is compact for easier handling and added control. It was designed not only to fit comfortably in the surgeon's hand, but to accommodate the full spectrum of knee anatomy.

The key features of the ONLoc® Drill Guide are:

  • A dovetail arm design.
  • An ergonomic guide handle precisely fitted for the surgeon's hand.
  • Simple locking mechanism for one-handed operation of the guide.
  • Light-weight and compact for added control.
  • A bullet for engaging the cortex more consistently and securely.
  • A rectangular guide arm cross section that is more rigid than round cross section designs.

ONLoc® Drill Guide System Set Components

  • ONLoc® Drill Guide: Our most rigid, accurate drill guide, designed for easy, single-handed placement.
  • ONLoc® ACL Elbow Aimer: For drilling to the laser mark at the aimer's elbow; useful when the ACL stump is not removed from the tibia.
  • ONLoc® ACL Tip Aimer: For drilling to the tip of the aimer; useful when the ACL stump is completely removed from the tibia.
  • ONLoc® PCL Tibial Aimer: Rigid design along with calibrated tip results in consistent, accurate guide wire placement; broad face of tip easily passes through notch and provides a means of protecting posterior capsule during guide wire drilling.
  • ONLoc® PCL Femoral Aimer: For outside in drilling with medial incision. Rigid design along with calibrated tip results in consistent accurate guide wire placement; hoop tip provides a visual reference for the diameter of the fully reamed tunnel, helping avoid tunnel encroachment on the articular surface.
  • ONLoc® Angled Bullet: Tip angle matches the engagement angle of the ONLoc® Drill Guide on the tibia for secure placement.
  • ONLoc® Bullet, 3.5mm ID : It can be used for the All Inside ACL-PCL Reconstructions

Ordering Information

BAK-7035-1 ONLoc® System SET 1 ACL/PCL Reconstruction Drill Guide System Comprises of BAK-7035, BAK-7035(a), BAK-7035(b), BAK-7035( c) & BAK-7035(d)
BAK-7035-2 ONLoc® System SET 2 ACL/PCL Reconstruction Drill Guide System Comprises of BAK-7035, BAK-7035(a), BAK-7035(e), BAK-7035( c) & BAK-7035(d)
BAK-7035-3 ONLoc® System SET 3 ACL Reconstruction Drill Guide System Comprises of BAK-7035, BAK-7035(a) & BAK-7035( e)
BAK-7035-4 ONLoc® System SET 4 ACL Reconstruction Drill Guide System Comprises of BAK-7035, BAK-7035(a) & BAK-7035(b)
BAK-7035 ONLoc® Drill Guide
BAK-7035(a) ONLoc® Angled Bullet, 2.4mm ID
BAK-7035(b) ONLoc® ACL Elbow Aimer
BAK-7035(c) ONLoc® PCL Tibial Aimer
BAK-7035(d) ONLoc® PCL Femoral Aimer
BAK-7035(e) ACL Tip Aimer
10056 ONLoc® Bullet, 3.5mm ID (For All Inside)

Note : ONLoc® guide systems are available in sets ONLY. Individual components not supplied separately.

Drill Bit Passing Pins / Graft Passing Guide Pins Drill Bit Passing Pin / Graft Passing Pins (Beath Pin) View Details

Drill Bit Passing Pin / Graft Passing Pins (Beath Pin)

Drill Bit Passing Pins / Graft Passing Guide Pins

The pins are used as guide wires for making the tibial and femoral tunnels in ACL-PCL surgeries.

Ordering Information

BAK-7036 Drill Bit Passing Pin Dia. 2.4mm; Len. 250mm
BAK-7037 Drill Tip Graft Passing Pin, (Beath Pin) Dia. 2.4mm; Len. 355mm
BAK-7116 Trocar - Tip Graft Passing Pin, (Beath Pin) Dia. 2.4mm; Len. 355mm
BAK-7203 Spade - Tip Graft Passing Pin, (Beath Pin) Dia. 4.7mm; Len. 355mm
10133 Suture Passing Pin, Drill Tip (Beath Pin) Dia. 2.4mm; Len. 355mm

Note: *Sterile only available for Indian market

FLOWERTIP Cannulated Femoral Reamers FLOWERTIP® Femoral Reamer, Cannulated View Details

FLOWERTIP® Femoral Reamer, Cannulated

FLOWERTIP Cannulated Femoral Reamers
  • Suited for an endoscopic ACL technique whereby the femoral tunnel is reamed from inside-out while minimizing the risk of injury to the PCL.
  • Drill bit shaft is etched with depth marks on three sides for easy identification of bone tunnel depth.
  • Facilitates open femoral tunnel preparation and in-line tunnel reaming for endosteal fixation procedures.
  • Head profile permits easy withdrawal from bone tunnels.
  • Available in diameters ranging from 6mm to 12mm.

Ordering Information

BAK-7045.60 FLOWERTIP® Femoral Reamer, Dia. 6.0mm Cannulated
BAK-7045.65* FLOWERTIP® Femoral Reamer, Dia. 6.5mm Cannulated
BAK-7045.70 FLOWERTIP® Femoral Reamer, Dia. 7.0mm Cannulated
BAK-7045.75* FLOWERTIP® Femoral Reamer, Dia. 7.5mm Cannulated
BAK-7045.80 FLOWERTIP® Femoral Reamer, Dia. 8.0mm Cannulated
BAK-7045.85* FLOWERTIP® Femoral Reamer, Dia. 8.5mm Cannulated
BAK-7045.90 FLOWERTIP® Femoral Reamer, Dia. 9.0mm Cannulated
BAK-7045.95* FLOWERTIP® Femoral Reamer, Dia. 9.5mm Cannulated
BAK-7045.10 FLOWERTIP® Femoral Reamer, Dia. 10.0mm Cannulated
BAK-7045.105* FLOWERTIP® Femoral Reamer, Dia. 10.5mm Cannulated
BAK-7045.11 FLOWERTIP® Femoral Reamer, Dia. 11.0mm Cannulated
BAK-7045.115* FLOWERTIP® Femoral Reamer, Dia. 11.5mm Cannulated
BAK-7045.12 FLOWERTIP® Femoral Reamer, Dia. 12.0mm Cannulated

Note : *Available on request*

CANNUDRILL Cannulated Tibial Reamers CANNUDRILL Cannulated Tibial Reamers View Details

CANNUDRILL Cannulated Tibial Reamers

CANNUDRILL Cannulated Tibial Reamers
  • Used for drilling bone tunnels in ACL and PCL reconstruction procedures.
  • Cannulated for use with a 2.4mm drill tip guide pin.
  • Graduated depth marks on three sides for easy identification of bone tunnel depth.
  • Available in diameters ranging from 6mm to 12mm.

Ordering Information

BAK-7038.60 CANNUDRILL® Tibial Reamer, Dia. 6.0mm Cannulated
BAK-7038.65* CANNUDRILL® Tibial Reamer, Dia. 6.5mm Cannulated
BAK-7038.70 CANNUDRILL® Tibial Reamer, Dia. 7.0mm Cannulated
BAK-7038.75* CANNUDRILL® Tibial Reamer, Dia. 7.5mm Cannulated
BAK-7038.80 CANNUDRILL® Tibial Reamer, Dia. 8.0mm Cannulated
BAK-7038.85* CANNUDRILL® Tibial Reamer, Dia. 8.5mm Cannulated
BAK-7038.90 CANNUDRILL® Tibial Reamer, Dia. 9.0mm Cannulated
BAK-7038.95* CANNUDRILL® Tibial Reamer, Dia. 9.5mm Cannulated
BAK-7038.10 CANNUDRILL® Tibial Reamer, Dia. 10.0mm Cannulated
BAK-7038.105* CANNUDRILL® Tibial Reamer, Dia. 10.5mm Cannulated
BAK-7038.11 CANNUDRILL® Tibial Reamer, Dia. 11.0mm Cannulated
BAK-7038.115* CANNUDRILL® Tibial Reamer, Dia. 11.5mm Cannulated
BAK-7038.12* CANNUDRILL® Tibial Reamer, Dia. 12.0mm Cannulated

Note : *Available on request*

Flexi Cannulated Reamers Flexi Cannulated ReamersView Details

Flexi Cannulated Reamers

Flexi Cannulated Reamers
Flexi Cannulated Reamers
  • Provides an accurate and reproducible system for anatomic cruciate ligament reconstruction
  • The unique puzzle cut design allows for forward and reverse drilling
  • Reaches more inferior and anterior sites on the lateral condyle than conventional reamers
  • Low Profile head enables precise intra-articular placement and safe tunnel creation
  • No need to hyperflex the knee while drilling through medial portal
  • Does not mitigate potential for damage to peripheral cartilage, bone or soft tissue
  • Reamers are available in 5.0mm to 10.0mm diameters with 0.5mm increments
  • Cannulated design to be used with 2.4mm flexible guide pin
  • 4.7mm reamer is available for use with ONButton CL® and Buttonfix® fixation techniques

Ordering Information

Flexi Cannulated Reamers Set
10118 Flexi Cannulated Reamer Set (12 pcs), Dia. 4.7mm to 10.0mm

* Flexi Cannulated Reamers are supplied in set only and available for Indian market only.

Depth Gauges For ACL/PCL reconstruction Depth Gauges For ACL/PCL reconstruction View Details

Depth Gauges For ACL/PCL reconstruction

Depth Gauges For ACL/PCL reconstruction

Depth Gauge is used to measure the total tunnel length of the femur in ACL-PCL surgeries.

Ordering Information

BAK-7053 Depth Gauge for ACL/PCL reconstruction
SURESHOT Transtibial Femoral Aimer SURESHOT Transtibial Femoral Aimer View Details

SURESHOT Transtibial Femoral Aimer

SURESHOT Transtibial Femoral Aimer
  • Used in ACL reconstruction to create the portal socket in order to place the graft passing pin.
  • Available for placing the graft passing pin through transtibial portals.
  • Available in offset sizes of 5mm, 6mm and 7mm.

Ordering Information

BAK-7054.05 SURESHOT Transtibial Femoral Aimer 5mm
BAK-7054.06 SURESHOT Transtibial Femoral Aimer 6mm
BAK-7054.07 SURESHOT Transtibial Femoral Aimer 7mm
LOCUS Transportal Femoral Aimer LOCUS Transportal Femoral Aimer View Details

LOCUS Transportal Femoral Aimer

LOCUS Transportal Femoral Aimer
  • Used in ACL reconstruction to create the portal socket in order to place the graft passing pin.
  • Available for placing the graft passing pin through transportal or anteromedial portal.
  • Available in offset sizes of 5mm, 6mm and 7mm.
BAK-7055.05 LOCUS Transportal Femoral Aimer 5mm
BAK-7055.06 LOCUS Transportal Femoral Aimer 6mm
BAK-7055.07 LOCUS Transtibial Femoral Aimer 7mm
Bone Tunnel Plugs Bone Tunnel Plugs View Details

Bone Tunnel Plugs

Tunnel Plugs
  • Helps to control fluid loss while providing a sealed instrumental portal.
  • Made of Polyacetal.
  • Available in sizes 7-8mm, 8-9mm and 9-10mm.
BAK-7056.78 Bone Tunnel Plug 7-8 mm
BAK-7056.89 Bone Tunnel Plug 8-9 mm
BAK-7056.910 Bone Tunnel Plug 9-10 mm
Tunnel Dilators/T-handle for tunnel dilators Tunnel Dilators/T-handle for tunnel dilators View Details

Tunnel Dilators/T-handle for tunnel dilators

Tunnel Dilators/T-handle for tunnel dilators
  • Used to expand tibial and femoral tunnels while compressing the cancellous bone without drilling.
  • Tapered ends allow for easy insertion and removal of the dilators from the femoral or tibial tunnel.
  • Full radiused depth marks in 5mm increments.
  • T-Handle-ergonomic styling allows for an easy grip and manoeuvrability; built in locking quick connector; allows for easy intraoperative changing, as minimizing the potential for the units to separate during use.
  • Available in diameters ranging from 6mm to 10mm.
  • Also available in cannulated versions.

Ordering Information

BAK-7057.06 Tunnel Dilator 6mm
BAK-7057.07 Tunnel Dilator 7mm
BAK-7057.08 Tunnel Dilator 8mm
BAK-7057.09 Tunnel Dilator 9mm
BAK-7057.10 Tunnel Dilator 10mm
BAK-7086.06 Tunnel Dilator Cannulated, 6mm
BAK-7086.07 Tunnel Dilator Cannulated, 7mm
BAK-7086.08 Tunnel Dilator Cannulated, 8mm
BAK-7086.09 Tunnel Dilator Cannulated, 9mm
BAK-7086.10 Tunnel Dilator Cannulated, 10mm
BAK-7062 T-Handle for Tunnel Dilators
Arthroscopic Probes Arthroscopic Probes View Details

Arthroscopic Probes

Arthroscopic Probes
  • Ergonomically designed calibrated probe allows the surgeon to accurately quantify pathology.
  • Unique handle gives a firm grip and aid in instrument control.
  • All straight probes have etched graduations in 5mm increments.
  • Probes are limited-reuse and may be disinfected, steam autoclaved or ethylene oxide sterilized.

Ordering Information

BAK-7065 Arthroscopic Probe
Microfracture Awls Microfracture Awls View Details

Microfracture Awls

Microfracture Awls
  • Allow the creation of localized vascular access channels in chondral defects.
  • Used for chondral resurfacing.
  • Also useful to mark intended drill sites in all ACL/PCL procedures.
  • Available in various angles.

Ordering Information

BAK-7143 Microfracture Awl, 20°
BAK-7066 Microfracture Awl, 30°
BAK-7067 Microfracture Awl, 45°
BAK-7144 Microfracture Awl, 60°
BAK-7218* Graphic Case for Microfracture Awl Set

Note : *Available on request*

Graft Sizing Block Graft Sizing Block View Details

Graft Sizing Block

Graft Sizing Block

It is used to check diameter of the graft in ACL / PCL Reconstruction surgeries. Available in two versions. For sizes 6mm to 12mm(6/7/8/9/l0/11/12mm) & sizes 6.5mm to 11.5mm(6.5/7.5/8.5/9.5/10.5/11.5mm).

BAK-7070 Graft Sizing Block for Dia. 6-7-8-9-10-11-12 mm
BAK-7124 Graft Sizing Block for Dia. 6.5-7.5-8.5-9.5-10.5-11.5 mm
Rasps Rasps View Details

Rasps

Straight/Convex/Half-round Rasps
  • Bone shaping devices especially suited for notchplasties.
  • Available in various shapes and sizes, (straight/convex/half-round)

Ordering Information

BAK-7075 Straight Rasp
BAK-7076 Convex Rasp
BAK-7077 Half-Round Rasp
Tunnel Notcher Tunnel Notcher View Details

Tunnel Notcher

Tunnel Notcher

The tunnel notcher removes a pathway of cancellous bone adjacent to the femoral tunnel. This vacant pathway will enhance guide wire placement and facilitate easier screw insertion.

BAK-7126 Tunnel Notcher
Graft Prep Station Graft Prep Station View Details

Graft Prep Station

Graft Prep Station

This fully modular system plays a key role during ACL and PCL reconstructive surgeries to prepare soft tissue and bone-tendon-bone autografts or allografts like patellar tendon, quadriceps tendon, semi-tendinosous and gracilis tendons.

The system allows the surgeon to interchange the various components to clean, whip stitch, measure, pre-tension, or add a fixation device. The sizing block, sold separately, can accommodate grafts from 6 to 12mm increments.

The Tension Clamp helps in pre-tensioning of the graft for those surgeons who feel it is necessary for satisfactory post-op results. The Graft Clamps are designed to act as an extra set of hands and incorporate atraumatic teeth to prevent damage to the graft.

Ordering Information

BAK-7069 Graft Prep Station includes GraftBoard, Sliding Base, Button Holder with scale, Graft Grasper Clamp-Left & Right and Suture Holder with Tensioner
Tendon Stripper Tendon Stripper View Details

Tendon Stripper

Tendon Strippers, Closed/Open
  • For safe retrieval of semitendinosus and gracilis tendons for ACL and PCL reconstruction procedures.
  • Allows for full thickness tendons to be harvested without damage to surrounding soft tissue
  • Closed design allows full, 360° enclosure for the tendon.
  • Allows the hamstring tendons to be harvested proximally without detaching them from the tibia.
  • The diameter of the stripper is large enough to accommodate the broadest semitendinosus tendon and the tip is sufficiently dull to prevent premature amputation of the graft.
  • Available in closed and open versions.
  • Available in sizes 6mm, 7mm and 8mm.

Ordering Information

BAK-7071.06 Tendon Stripper, Closed End, Dia: 6mm
BAK-7071.07 Tendon Stripper, Closed End, Dia: 7mm
BAK-7071.08 Tendon Stripper, Closed End, Dia: 8mm
BAK-7073.06 Tendon Stripper, Open End, Dia: 6mm
BAK-7073.07 Tendon Stripper, Open End, Dia: 7mm
BAK-7073.08 Tendon Stripper, Open End, Dia: 8mm
Notchplasty curette Notchplasty curette View Details

Notchplasty curette

Notchplasty curette

Designed specifically to facilitate the removal of soft tissue and bone from the notch during notchplasty

Ordering Information

BAK-7095 Notchplasty Curette
PCL Elevators PCL Elevator View Details

PCL Elevator

PCL Elevators
  • Sharp elevator tip elevates the PCL and periosteum from the bone when used in the fore/aft plane.
  • Blunt elevator sides open the posterior compartment when used in a rotational motion.
  • Wire capture hole secures the wire while reaming the tibial tunnel, protecting the neurovascular structures from the drill tip as it exits the posterior cortex.
BAK-7083 PCL Elevator
PCL Rasp PCL Rasp View Details

PCL Rasp

PCL Rasp

A bone shaping device especially suited for notchplasty

BAK-7160 PCL Rasp
PCL Curette PCL Curette View Details

PCL Curette

PCL Curette

Designed specifically to facilitate the removal of soft tissue and bone during PCL Reconstruction

Ordering Information

BAK-7184 PCL Curette
Graphic Cases for Knee Arthroscopy Instruments Graphic Cases for Knee Arthroscopy Instruments View Details

Graphic Cases for Knee Arthroscopy Instruments

Graphic Cases for Knee Arthroscopy Instruments

The BIOTEK ACL-PCL Reconstruction Instrumentation Set is a complete system of instruments for the accurate arthroscopic reconstruction during single-bundle ACL and PCL reconstruction procedures. The system components are sized for both bone-tendon-bone and soft tissue grafts.

Ordering Information

10037 Graphic Case for ACL Reconstruction (Small)
BAK-7159 Graphic Case for ACL Reconstruction (Large)
BAK-7079 Graphic Case for ACL Reconstruction (Small)
BAK-7145 Graphic Case for ACL-PCL Reconstruction (Large)

*The graphic shown here is of BAK-7145

Meniscal Repair (Inside-Out Technique) BIOCINCH® Meniscal repair set (Inside-Out Technique) View Details

BIOCINCH® Meniscal repair set (Inside-Out Technique)

Meniscal Repair (Inside-Out Technique)

BIOCINCH® Meniscal repair set comprises of two straight meniscal repair needles preloaded with USP size 2-0 or 0 suture. Meniscal repair needles are made of stainless steel, and are ultrathin and strong, yet flexible for easy passage through guide sleeves. The suture is made of UHMWPE material provides ultra-high strength.

Ordering Information

BAK-7196 BIOCINCH® Meniscal repair set with needles Fiber USP Size 2-0, suture Len. 75cm straight needles-2 units, needle Len. 25cm
BAK-7216 BIOCINCH® Meniscal repair set with needles Fiber USP Size 0, suture Len. 75cm straight needles-2 units, needle Len. 25cm

Instruments

The BIOCINCH® Meniscal repair set has been designed to address meniscal tears in the anterior, middle and posterior zones of the meniscus using an "inside out" approach. The single lumen and double lumen pre-bent guide sleeves feature easy passage of needles, effective suture placement- vertical & horizontal, and to access easily on different zones of meniscus.The Curved Probe measures the width of the meniscus. The angled tip of the Meniscal Rasp is ideally shaped to access inside the meniscal tear for debridement prior to repair. Simple to learn and replicate.

Ordering Information

BAK-7198 Curved Probe for Meniscus Repair
BAK-7199 Meniscus Rasp
BAK-7204 Meniscus Curette
BAK-7200 Guide Sleeve (Double Lumen) for Meniscus Repair, Straight
BAK-7201 Guide Sleeve (Double Lumen)for Meniscus Repair, Curved, Left
BAK-7202 Guide Sleeve (Double Lumen)for Meniscus Repair, Curved, Right
BAK-7211 Guide Sleeve (Single Lumen)for Meniscus Repair, Straight
BAK-7212 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 10°
BAK-7213 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 20°
BAK-7214 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 30°
BAK-7215 Guide Sleeve (Single Lumen)for Meniscus Repair, Curved, 40°
BAK-7205 Needle Pusher
BAK-7206 Sleeve Bender
BAK-7217 Graphic Case for Meniscus Repair Instruments
PIVOT-FIX� PIVOT-FIX View Details

PIVOT-FIX

PIVOT-FIX�

Low profile design Ideal for the tunnel in meniscus root repair. Flat Button fits on tibia side. Open and close holes combination to pass the sutures and slide sutures easily.

Ordering Information

BAK-7002PF PIVOT-FIX Fixation Button